統計各MS密封膠的拉伸粘接強度變化率

發布時間 : 2025-1-22 15:41:32
Views:

(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.

統計各MS密封膠的拉伸粘接強度變化率

(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.

發布時間 : 2025-1-22 15:41:32
Views:

在溫度90-120℃環境下放置12個月，6個牌號MS密封膠均未出現粘接破壞現象。在溫度1500C環境中，2#,5#和6#在8個月內未出現粘接破壞現象;1#,3#和4#分別在6,3和5個月時開始出現粘接破壞現象，其中3#MS密封膠最差，在3個月即開始出現粘接破壞現象。在溫度180℃環境中，所有膠在5個月時均出現粘接失效現象，無法進行拉伸試驗，最短7d時即有3個牌號MS密封膠出現粘接破壞現象。大部分粘接失效出現在玻璃界面。

統計各MS密封膠的拉伸粘接強度變化率。拉伸粘接強度變化率計算方法:拉伸粘接強度變化率=(老化后拉伸粘接強度/23℃拉伸粘接強度一1)x100%。

可知，在溫度90℃長期老化至12個月過程中，6個牌號MS密封膠7d時拉伸粘接強度變化率均為正值，與初始相比變大。MS密封膠1#,2#放置12個月后拉伸粘接強度仍大于初始值，變化趨勢為先增大后減小，轉折點在老化6個月時。MS密封膠3#,4#在高溫2個月后拉伸粘接強度基本都小于初始值，并隨時間延長呈現逐漸減小趨勢，老化12個月時衰減率在15%以上。MS密封膠5#,6#在12個月內拉伸強度基本呈減小趨勢，但在6個月以?xún)?nèi)仍大于初始值。至12個月時，6個牌號MS密封膠試件未出現粘接破壞，強度變化率在一17.8%一+2.4%。http://www.www.mobmib.com/

Scan the QR code to read on your phone

上一篇: 介紹彩槳的性能及其在單組分聚氨酯密封膠中上色效果

下一篇: 丁基防水嵌縫膠2#,3#在溫度150℃環境放置

上一篇: 介紹彩槳的性能及其在單組分聚氨酯密封膠中上色效果

下一篇: 丁基防水嵌縫膠2#,3#在溫度150℃環境放置